Anvil 1-1/4 in. FPT X 1-1/4 in. D FPT Galvanized Malleable Iron Elbow Size:1/4 New O-rings must be lubricated

New O-rings must be lubricated with grease when installed

Product Type: Flush Ring Pull

Activates when water temperature falls below 37 F and starts to release the exact amount of water to keep it at 37 F

faster and more accurate

This ensures your tools and equipment look and perform better over time

Anvil 1-1/4 in. FPT X 1-1/4 in. D FPT Galvanized Malleable Iron Elbow Size:1/4 New O-rings must be lubricatedAnvil International offers the broadest line of Malleable Iron Fitting in galvanized finish. Every fitting is manufactured and tested to meet Anvils strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16. 3 and unions conform to ASME B16. 39. All elbows and tees 3 8 inch (10 DN) and larger are 100 percent gas tested at a minimum of 100 PSI (6. 9 bar). Brand Name: Anvil End 1 Diameter: 1 1 4 in. End 1 Type: FPT End 2